Sensaphone 2.8K Type Ultra Low Temperature Sensor Manual de usuario descargar pdf

Instructions for 2.8K Type Ultra Low Temperature Sensor in Glass Bead Vial

(FGD-0107-TEF)

Instructions for Models 400, 800, 1400, 1800, 2800, and IMS-4210-E

The probe may be connected to any available input terminal. Refer to your user’s manual for

configuration and programming. To connect the probe:

1. Remove any existing wiring or sensors (including local thermistor) from the input terminal.

2. Attach wire from the weatherproof temperature probe to the input terminal and ground

respectively.

Instructions for WEB600, CELL682, Express II and Sensaphone 2000

The probe may be connected to any available input terminal. Refer to your user’s manual for

configuration and programming. To connect the probe:

1. Remove any existing wiring or sensors from the input terminal.

2. Place the corresponding input shunt in the ‘a’ position for Express II, or the TMP/DRY

position for the 2000.

3. Attach wire from the temperature probe to the input terminal and ground respectively.

4. Program the input type for a 2.8K thermistor in either Fahrenheit or Celsius.

Warning: Do not submerge.

For Technical Support call 877-373-2700 or E-mail suppor[email protected]

1 2

Instructions for 2.8K Type Ultra Low Temperature Sensor in Glass Bead Vial (FGD-0107-TEF)Instructions for Models 400, 800, 1400, 1800, 2800, and IMS

2.8K Type Ultra Low Temperature Sensor in Glass Bead VialLIT-0175

Sin comentarios

Sensaphone 2.8K Type Ultra Low Temperature Sensor Manual de usuario